Installation

NAVIGATION: MULTI-DISPLAY:

INSTALLATION

1. INSTALL NAVIGATION RECEIVER ASSEMBLY





(a) Install the navigation receiver assembly as shown in the illustration.
2. INSTALL RADIO NO. 2 BRACKET





(a) Install the radio No. 2 bracket with the 5 bolts.
3. INSTALL RADIO NO. 1 BRACKET





(a) Install the radio No. 1 bracket with the 5 bolts.
4. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY
(a) Connect each connector.





(b) Engage the 4 clips.
(c) Install the navigation receiver with heater control panel assembly with the 4 bolts.
5. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (Installation)

6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (Installation)

7. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) (Installation)

8. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) (Installation)

9. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (Installation)

10. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) (Installation)

11. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (Installation)

12. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (Installation)

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (Installation)

14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (Installation)

15. INSERT MAP DISC