Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Camry V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








2GR-FE IGNITION: IGNITION COIL:

INSTALLATION

1. INSTALL IGNITION COIL ASSEMBLY





(a) Install the 6 ignition coils with the 6 bolts.
Torque: 10 Nm (102 kgf-cm, 10 ft-lbf)
(b) Connect the 6 ignition coil connectors.
2. INSTALL NO. 1 SURGE TANK STAY





(a) Install the No. 1 surge tank stay with the bolt.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)

NOTE: Make sure that there is no oil on the bolt threads.





(b) Install the bolt and clamp.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)
3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY (Installation)

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (Installation)

6. ADD ENGINE COOLANT (Testing and Inspection)

7. CHECK FOR ENGINE COOLANT LEAKS (Testing and Inspection)

8. INSTALL COWL TOP PANEL OUTER SUB-ASSEMBLY (Installation)

9. INSTALL WINDSHIELD WIPER LINK ASSEMBLY
(Installation)
10. INSTALL V-BANK COVER SUB-ASSEMBLY (Installation)
pro multis · About Operation CHARM