Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Solara Convertible V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








3MZ-FE ENGINE MECHANICAL: DRIVE BELT:

INSTALLATION

1. INSTALL VANE PUMP V BELT
(a) Install the belt on each pulley.





(b) Using a bar, adjust the belt tension and tighten bolt B.
Torque: 43 Nm (439 kgf-cm, 32 ft-lbf)
(c) Tighten bolt A.
Torque: 43 Nm (439 kgf-cm, 32 ft-lbf)
2. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
(a) Install the belt on each pulley.





(b) Tighten adjusting bolt C, and adjust the belt tension.
(c) First tighten bolt A, then bolt B.
Bolt A - Torque: 58 Nm (591 kgf-cm, 43 ft-lbf)
Bolt B - Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
3. INSTALL FRONT FENDER APRON SEAL RH
4. INSTALL FRONT WHEEL RH
pro multis · About Operation CHARM