Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Camry L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light)





(a) Engage each claw.
(b) Install the front bumper assembly with the 8 screws, 2 clips, 2 radiator grille protectors and bolt.





(c) Install the pin hold clip.
HINT: Use the same procedures for the RH side and LH side.

2. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light)





(a) Connect each connector.
(b) Engage each claw.
(c) Install the front bumper assembly with the 8 screws, 2 clips, 2 radiator grille protectors and bolt.





(d) Install the pin hold clip.
HINT: Use the same procedures for the RH side and LH side.

3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE)





(a) Install the cool air intake duct seal with the 7 clips.
4. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
5. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
6. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments
7. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments
pro multis · About Operation CHARM