Removal

2AZ-FE CHARGING: GENERATOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT WHEEL RH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE FRONT FENDER APRON SEAL RH
5. REMOVE V-RIBBED BELT Removal
6. REMOVE GENERATOR ASSEMBLY





(a) Disconnect the generator connector.
(b) Remove the nut and disconnect the wire harness from terminal B.
(c) Remove the bolt and wire harness clamp bracket.
(d) Remove the wire harness clamps.





(e) Remove the 2 bolts and generator assembly.