CD Sound Skips

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: CD Sound Skips

CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD




(a) Check the CD.
OK:
The CD is clean.
HINT: If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTE: Do not use a conventional record cleaner or anti-static preservative.

NG -- CLEAN CD
OK -- Continue to next step.

2. CHECK CD




(a) Check that the CD is not deformed or cracked.
OK:
No deformation or cracks on the CD
NG -- CD IS FAULTY
OK -- Continue to next step.

3. CHECK OPERATION OF ANOTHER CD
(a) Check using another CD.
(1) Check if the problem recurs using another CD.
OK:
Malfunction disappears.
NG -- CHECK NAVIGATION RECEIVER ASSEMBLY
OK -- CD IS FAULTY
4. CHECK NAVIGATION RECEIVER ASSEMBLY
(a) Check the navigation receiver assembly installation condition.
(1) Check that the navigation receiver assembly is properly installed.
OK:
The navigation receiver assembly is properly installed.
NG -- REINSTALL NAVIGATION RECEIVER ASSEMBLY
OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY