Removal

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: REMOVAL

REMOVAL

1. EJECT MAP DISC
(a) Turn the ignition switch to ACC.
(b) Push the "INFO" button.
(c) Touch "Map Data" on the navigation screen.
(d) Touch "EJECT DVD" on the navigation screen to eject the map disc.
(e) Turn the ignition switch off.
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) Removal
3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) Removal
4. REMOVE NO. 2 CONSOLE BOX CARPET Removal
5. REMOVE CONSOLE BOX ASSEMBLY Removal
6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal
7. REMOVE FRONT DOOR SCUFF PLATE RH Removal
8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal
9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
10. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal
11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
12. REMOVE CONSOLE BOX SUB-ASSEMBLY Removal
13. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL Removal
14. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET





(a) Remove the 4 bolts.
(b) Disengage the 2 clips.
(c) Disconnect each connector and remove the navigation receiver assembly with bracket.
15. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY





(a) Remove the 4 screws.
16. REMOVE NO. 1 RADIO RECEIVER BRACKET





(a) Remove the 4 bolts and the No. 1 radio receiver bracket.
17. REMOVE NO. 2 RADIO RECEIVER BRACKET





(a) Remove the 4 bolts and the No. 2 radio receiver bracket.