Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY
(a) Connect the fog light connector. (w/ Fog Light)





(b) Engage the 4 claws to install the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(c) Install the clip.
(d) Install the 2 bolts and 6 screws.





(e) Install the screw.
HINT: Use the same procedure for the RH side and LH side.





(f) Install the pin hold clip.
NOTICE: Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.
HINT: Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE Installation
3. INSTALL RADIATOR GRILLE PROTECTOR Installation
4. INSTALL COOL AIR INTAKE DUCT SEAL





(a) Install the cool air intake duct seal with the 12 clips.
5. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) Adjustments
6. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
7. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments
8. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments
pro multis · About Operation CHARM