Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Neutral Safety Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Neutral Safety Switch: Adjustments








U760F AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT

ADJUSTMENT

1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Remove the control shaft lever.
HINT: See the steps from "Remove Cool Air Intake Duct Seal" through "Remove Park/Neutral Position Switch Assembly" Removal.





(b) Loosen the 2 bolts of the park/neutral position switch.





(c) Align the protrusions of the park/neutral position switch.

Text in Illustration









(d) Hold the park/neutral position switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
NOTICE: After installing the park/neutral position switch, confirm that the 2 protrusions on the switch are aligned.

(e) Install the control shaft lever.
HINT: See the steps from "Install Park/Neutral Position Switch Assembly" through "Install Cool Air Intake Duct Seal" Installation.

(f) After the adjustment, perform the switch operation check Initial Inspection and Diagnostic Overview.
pro multis · About Operation CHARM