Removal

1AR-FE STARTING: STARTER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
4. REMOVE BATTERY Removal
5. REMOVE INLET AIR CLEANER ASSEMBLY Removal
6. REMOVE STARTER ASSEMBLY





(a) Disconnect the starter connector.
(b) Open the terminal cap, remove the nut and disconnect the starter wire.





(c) Remove the 2 bolts and starter.