Disassembly

SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY

NOTICE:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

1. REMOVE VERTICAL ADJUSTER COVER LH (for Driver Seat)

(a) Using a screwdriver, disengage the 2 claws and remove the vertical adjuster cover LH.

HINT
Tape the screwdriver tip before use.

2. REMOVE VERTICAL ADJUSTING HANDLE NO. 2 (for Driver Seat)

(a) Remove the 2 screws and vertical adjusting handle.

3. REMOVE RECLINING ADJUSTER RELEASE HANDLE

(a) Lift the reclining adjuster release handle.

(b) Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.

HINT
Tape the screwdriver tip before use.

4. REMOVE FRONT SEAT CUSHION SHIELD

(a) Disengage the 2 hooks.

(b) Remove the 3 screws.

(c) Disengage the 2 claws and remove the front seat cushion shield.

5. REMOVE LOWER SEAT TRACK SPACER

(a) Remove the 2 screws and lower seat track spacer.

6. REMOVE FRONT SEAT INNER BELT ASSEMBLY Removal

7. REMOVE FRONT INNER SEAT CUSHION SHIELD

(a) Remove the screw.

(b) Disengage the claw and clip, and then remove the front inner seat cushion shield.

8. REMOVE FRONT SEAT CUSHION COVER WITH PAD

(a) Disengage the clamp.

(b) Disengage the hooks and remove the front seat cushion cover with pad.

9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Remove the 16 hog rings and separate type front seat cushion cover.

10. REMOVE FRONT SEAT BACK BOARD SUB-ASSEMBLY

(a) Remove the 2 screws.

(b) Disconnect the 14 clamps and front separate type seat back cover.

(c) Pull the seat back board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the seat back board.

11. REMOVE FRONT SEAT HEADREST SUPPORT

(a) Detach the 2 claws and remove the headrest support.

12. REMOVE FRONT SEAT HEADREST SUPPORT

13. REMOVE FRONT SEAT BACK COVER WITH PAD

(a) Disengage the 3 hooks.

(b) Remove the 2 hog rings.

(d) Remove the front seat back cover with pad.

14. REMOVE FRONT SEPARATE TYPE SEAT BACK COVER

(a) Remove the 10 hog rings and front separate type seat back cover.

15. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY Removal

16. REMOVE RECLINING ADJUSTER INSIDE COVER LH

(a) Remove the screw.

(b) Disengage the claw and remove the reclining adjuster inside cover LH.

17. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT
Use the same procedures for the RH side and LH side.

18. REMOVE RECLINING ADJUSTER INSIDE COVER LH

(a) Remove the screw and reclining adjuster inside cover LH.

19. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT
Use the same procedures for the RH side and LH side.

20. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH

(a) Using a screwdriver, disengage the claw and remove the front lower seat cushion shield LH.

21. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH

HINT
Use the same procedures for the RH side and LH side.

22. REMOVE SEAT POSITION SENSOR (for Driver Seat) Removal