Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY

(a) Install the front seat inner belt assembly with the nut.





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

(b) Connect each connector and clamp.

2. INSTALL FRONT SEAT ASSEMBLY Installation

3. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK Installation

4. INSTALL INNER SEAT TRACK COVER Installation

5. INSTALL INNER SEAT TRACK COVER (for 4WD RH Side) Installation

6. INSTALL OUTER SEAT TRACK COVER Installation

7. INSTALL FRONT SEAT HEADREST ASSEMBLY

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

9. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)

Diagnosis System