Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





MF1A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

Removal for 2AZ-FE.

2. REMOVE REAR ENGINE MOUNTING INSULATOR Removal

3. INSTALL ENGINE HANGER Removal

4. REMOVE STARTER ASSEMBLY Removal

5. DISCONNECT WIRE HARNESS Removal

6. REMOVE REAR ENGINE MOUNTING BRACKET Removal

7. REMOVE DRIVE PLATE AND TORQUE CONVERTER CLUTCH SETTING BOLT Removal

8. REMOVE TRANSFER STIFFENER PLATE RH

(a) Remove the 4 bolts and transfer stiffener plate RH.





9. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY Removal

10. REMOVE TRANSFER ASSEMBLY

(a) Remove the 2 bolts and 6 nuts.





(b) Using a plastic hammer, remove the transfer assembly from the transaxle assembly.

NOTICE:
* Remove the transfer assembly from the transaxle assembly without tilting it.
* During removal, do not hold the transfer assembly by the oil seals on either side of the assembly.