Installation

NAVIGATION: MULTI-DISPLAY: INSTALLATION

1. INSTALL NAVIGATION RECEIVER ASSEMBLY

(a) Install the navigation receiver assembly as shown in the illustration.





2. INSTALL RADIO NO. 2 BRACKET

(a) Install the radio No. 2 bracket with the 5 bolts.





3. INSTALL RADIO NO. 1 BRACKET

(a) Install the radio No. 1 bracket with the 5 bolts.





4. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 clips.





(c) Install the navigation receiver with heater control panel assembly with the 4 bolts.

5. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY Installation

6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

7. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) Installation

8. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) Installation

9. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) Installation

10. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) Installation

11. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

12. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

15. INSERT MAP DISC