Removal

2AR-FE INTAKE: VACUUM SWITCHING VALVE (for ACIS): REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

3. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal

4. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal

5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

6. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

7. REMOVE COWL TOP OUTER FRONT PANEL SUB-ASSEMBLY Removal

8. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

9. REMOVE VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

(a) Disconnect the 2 vacuum hoses, clamp and connector.





(b) Remove the bolt and vacuum switching valve assembly.