Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2AZ-FE STARTING: STARTER: INSTALLATION

1. INSTALL STARTER ASSEMBLY (for Manual Transaxle)

(a) Install the starter assembly, clutch accumulator bracket, and wire harness clamp bracket with the 3 bolts.





Bolt A - Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

Bolt B - Torque : 12 Nm (120 kgf-cm, 9 ft-lbf)

(b) Connect the wire harness to terminal 30 with the nut. Then, attach the terminal cap.





Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(c) Connect the terminal 50 connector to the starter assembly.

2. INSTALL STARTER ASSEMBLY (for Automatic Transaxle)

(a) Install the starter assembly and wire harness clamp bracket with the 2 bolts.





Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(b) Connect the wire harness to terminal 30 with the nut. Then, attach the terminal cap.





Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(c) Connect the terminal 50 connector to the starter assembly.

3. INSTALL BATTERY CARRIER

4. INSTALL BATTERY

5. INSTALL WIRE HARNESS

(a) Install the claw and wire harness.





6. INSTALL AIR CLEANER CASE Installation

7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE Installation

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL