Removal

AUDIO / VIDEO: STEERING PAD SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

4. REMOVE STEERING PAD Removal

5. REMOVE STEERING PAD SWITCH LH

(a) Disconnect the steering pad switch connector from the spiral cable.

(b) Remove the screw.

(c) Disengage the 2 pins and claw, and remove the steering pad switch LH.

6. REMOVE STEERING PAD SWITCH ASSEMBLY

(a) Disconnect the steering pad switch connector from the spiral cable.

(b) Remove the screw.

(e) Disengage the 2 pins and claw, and remove the steering pad switch assembly.