Operation Check

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: OPERATION CHECK

1. CHECK POWER WINDOW MASTER SWITCH (WINDOW LOCK SWITCH)

(a) Check that the passenger side power window and rear windows cannot be operated when the window lock switch of the power window master switch is pressed.

(b) Check that the passenger side power window and rear windows can be operated when the window lock switch is pressed again.

2. CHECK MANUAL UP / DOWN FUNCTION

(a) Check that the driver side power window operates as follows:

OK:

(b) Check that the passenger side power window operates as follows:

OK:

(d) Check that the rear RH power window operates as follows:

OK:

3. CHECK AUTO DOWN FUNCTION

(a) Check that the driver side power window operates as follows:

OK:

4. CHECK REMOTE UP / DOWN FUNCTION

(a) Check that the passenger side power window operates as follows:

OK:

(b) Check that the rear LH power window operates as follows:

OK:

5. CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF

(a) Check that all the power windows can be operated with the power window master switch after the ignition switch is turned off.

(b) Check that the key-off operation function does not operate after the driver or passenger side door is opened.

(c) Check that all the power windows cannot be operated after more than approximately 45 seconds elapse after the ignition switch is turned off.

6. CHECK PTC OPERATION

HINT
PTC operation is a function that prevents overloading of the power window regulator by stopping the motor. PTC operation activates when the power window switch is operated for a predetermined amount of time.

(a) Pull up and hold the power window switch for more than 90 seconds. Then release the switch.

(b) Check that pressing the switch does not move the window.

(c) Wait until 60 seconds have passed since the switch was released in the first step. Check that pressing the switch results in normal window movement.