Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Pinout Values and Diagnostic Parameters

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: TERMINALS OF ECU

1. CHECK MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)

(a) Disconnect the 2A, 2B, 2E, 2F, 2G and 2H junction block connectors.

(b) Disconnect the E63 ECU connector.

If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the ECU and junction block connectors.

(e) Measure the voltage according to the value(s) in the table below.

If the result is not as specified, the main body ECU (instrument panel junction block) may have a malfunction.