Removal

2ZR-FE INTAKE / EXHAUST: EXHAUST MANIFOLD: REMOVAL

1. REMOVE AIR FUEL RATIO SENSOR

Removal

2. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 4 bolts and No. 1 exhaust manifold heat insulator.





3. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Disconnect the heated oxygen sensor connector.

(b) Remove the 4 bolts and 4 compression springs.





(c) Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

(d) Remove the 2 gaskets.

4. REMOVE MANIFOLD STAY

(a) Remove the 2 nuts and 2 drive shaft heat insulator sub-assemblies.





(b) Remove the 3 bolts and manifold stay.





5. REMOVE EXHAUST MANIFOLD

(a) Remove the 5 nuts and exhaust manifold.





(b) Remove the exhaust manifold gasket.

6. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 3 bolts and No. 2 exhaust manifold heat insulator.