CD/DVD Sound Skips

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: CD/DVD Sound Skips
- CD/DVD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DISC

(a) Check that the disc is not deformed or cracked.





OK:

No deformation or cracks on the disc

NG -- CHANGE DISC
OK -- Continue to next step.

2. CHECK DISC

(a) Check the disc.





OK:

The disc is clean.

NOTICE:
Do not use a conventional record cleaner or antistatic preservative.

HINT
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NG -- CLEAN DISC
OK -- Continue to next step.

3. CHECK OPERATION

(a) Check if the same problem occurs again using a known good disc.

OK:

The problem does not occur.

NG -- CHECK NAVIGATION RECEIVER ASSEMBLY

OK -- END

4. CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Check that the navigation receiver assembly is properly installed.

OK:

The navigation receiver assembly is properly installed.

NG -- REINSTALL NAVIGATION RECEIVER ASSEMBLY PROPERLY

OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal