Installation

EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect the headlight cleaner hose. (w/ Headlight Cleaner System)

(b) Connect each connector.

(c) Install the front bumper assembly as shown in the illustration.





(d) Engage the 3 claws to install the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(e) Install the front spoiler cover with the 6 bolts and 2 screws. (w/ Front Spoiler)





(f) Install the clip. (w/ Front Spoiler)

(g) Install the 7 clips.





(h) Install the 2 bolts and 4 screws.

(i) Install the screw.





HINT
Use the same procedure for the RH side and LH side.

(j) Install the pin hold clip.





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR SUPPORT OPENING COVER

(a) Engage the 2 claws and install the radiator support opening cover.





(b) Install the 3 clips.

3. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

4. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) Adjustments

5. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

6. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

7. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments