Disassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: DISASSEMBLY

1. REMOVE CONSOLE BOX POCKET (w/ Power Outlet Socket)

(a) Disengage the 2 claws and remove the console box pocket as shown in the illustration.





2. REMOVE CONSOLE REAR END PANEL (w/ Power Outlet Socket)

(a) Disengage the 10 claws to remove the console rear end panel.





3. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (w/ Power Outlet Socket)

(a) Using a screwdriver, pull out the box door hinge shafts.





HINT
* The illustration is for the LH side.
* Use the same procedure as for the LH side.

(b) Remove the console compartment door assembly.

(c) Remove the 4 screws.





(d) Remove the 4 screws and console compartment door sub-assembly.





4. REMOVE REAR CONSOLE COMPARTMENT DOOR BOX COVER (w/ Power Outlet Socket)

(a) Pull the rear console compartment door box cover in the direction indicated by the arrow to disengage the 2 claws and 5 guides, and remove the rear console compartment door box cover.





5. REMOVE NO. 2 CONSOLE COMPARTMENT DOOR INSERT (w/ Power Outlet Socket)

(a) Pull the No. 2 console compartment door insert in the direction indicated by the arrow to disengage the 3 claws and 7 guides, and remove the No. 2 console compartment door insert.





6. REMOVE NO. 1 CONSOLE COMPARTMENT DOOR INSERT (w/ Power Outlet Socket)

HINT
Use the same procedure as for the LH side.

7. REMOVE NO. 2 BOX SIDE PANEL (w/ Power Outlet Socket)

(a) Remove the 2 screws.





(b) Pull the No. 2 box side panel in the direction indicated by the arrow to disengage the 9 claws and guide, and remove the No. 2 box side panel.





8. REMOVE NO. 1 BOX SIDE PANEL (w/ Power Outlet Socket)

HINT
Use the same procedure as for the LH side.

9. REMOVE CIGARETTE LIGHTER WIRE ASSEMBLY (w/ Power Outlet Socket)

(a) Disconnect the 2 connectors.





(b) Disengage the clamp and remove the cigarette lighter wire assembly.

10. REMOVE STEREO JACK ADAPTER ASSEMBLY (w/ Power Outlet Socket) Removal

11. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY (w/ Power Outlet Socket) Removal

12. REMOVE CENTER POWER OUTLET SOCKET COVER (w/ Power Outlet Socket) Removal

13. REMOVE CONSOLE REAR END PANEL (w/o Power Outlet Socket)

(a) Disengage the 10 claws to remove the console rear end panel.





14. REMOVE REAR CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (w/o Power Outlet Socket)

(a) Remove the 2 screws and remove the rear console compartment door sub-assembly.





15. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY (w/o Power Outlet Socket)

(a) Remove the 2 screws and the console compartment door hinge sub-assembly.





16. REMOVE OUTER CONSOLE COMPARTMENT DOOR (w/o Power Outlet Socket)

(a) Remove the 4 screws.





(b) Disengage the 6 claws and remove the outer console compartment door.

17. REMOVE NO. 2 BOX SIDE PANEL (w/o Power Outlet Socket)

(a) Remove the screw.





(b) Disengage the 3 claws and 6 guides and remove the No. 2 box side panel.





18. REMOVE NO. 1 BOX SIDE PANEL (w/o Power Outlet Socket)

HINT
Use the same procedure as for the LH side.