Removal

BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL

1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

HINT
Refer to the instructions for Removal of the upper instrument panel assembly Removal.

2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

3. REMOVE STOP LIGHT SWITCH ASSEMBLY Removal

4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

5. REMOVE BRAKE PEDAL RETURN SPRING

(a) Remove the brake pedal return spring from the brake pedal support sub-assembly and push rod pin.

6. REMOVE PUSH ROD PIN

(a) Remove the clip and push rod pin to separate the brake pedal sub-assembly from the push rod clevis.

7. SEPARATE DRIVER SIDE JUNCTION BLOCK ASSEMBLY

(a) Remove the bolt and nut, and separate the driver side junction block assembly.

8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement.

(b) Disengage the clamp and disconnect the connector from the brake pedal stroke sensor assembly.

(d) Remove the nut from the brake pedal support assembly.