Removal

2ZR-FXE COOLING: EXHAUST PIPE GAS CONTROL ACTUATOR: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. DRAIN ENGINE COOLANT (for Engine) Coolant (for Engine)

3. REMOVE EXHAUST PIPE GAS CONTROL ACTUATOR

NOTICE:
When removing the exhaust pipe gas control actuator, use caution because coolant may spill out from the exhaust heat recirculation system.

(a) Disconnect the 2 water hoses.





(b) Using a screwdriver with the tip taped, pry the portion indicated in the illustration to disengage the spring.





Text in Illustration





(c) Remove the 3 bolts, 3 nuts, gasket and exhaust pipe gas control actuator case.





(d) While closing port A, apply compressed air to port B to remove the exhaust pipe gas control actuator shown in the illustration.





Text in Illustration





HINT
Use a piece of cloth to catch the exhaust pipe gas control actuator.