Removal

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE FRONT SEAT HEADREST ASSEMBLY Removal

6. REMOVE OUTER SEAT TRACK COVER Removal

7. REMOVE INNER SEAT TRACK COVER Removal

8. REMOVE FRONT SEAT ASSEMBLY Removal

9. REMOVE FRONT SEAT INNER BELT ASSEMBLY

(a) Disconnect each connector and clamps.

(b) Remove the nut and front seat inner belt assembly.