Installation

FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION

1. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

HINT
Refer to the procedure from Temporarily Tighten Front No. 1 Lower Suspension Arm Sub-assembly RH Installation.

2. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH

(a) Temporarily install the front No. 1 lower suspension arm LH to the front suspension crossmember with the 2 bolts and nut.





NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

3. CONNECT FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH Installation

4. INSTALL FRONT WHEELS

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

5. STABILIZE SUSPENSION

(a) Lower the vehicle.

(b) Press down on the vehicle several times to stabilize the suspension.

6. FULLY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH

(a) Fully tighten the bolt A and B.





Torque : 233 Nm (2376 kgf-cm, 172 ft-lbf)

NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

7. INSTALL NO. 1 ENGINE UNDER COVER

8. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

HINT
Inspect and adjust the front wheel alignment Service and Repair.