Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2011 >> Yaris L4-1.5L (1NZ-FE) >> Repair and Diagnosis >> Windows and Glass >> Windows >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Driver Side Power Window Does Not Operate With Power Window Master Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver Side Power Window Does Not Operate With Power Window Master Switch





WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Driver Side Power Window does not Operate with Power Window Master Switch
- Driver Side Power Window does not Operate with Power Window Master Switch

DESCRIPTION

If the manual UP / DOWN and AUTO DOWN functions do not operate, a malfunction may exist in the power window regulator master switch, power window regulator motor or wire harness.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DRIVER SWITCH)

(a) 3 Door:





Inspect the driver switch.

(1) Remove the power window regulator master switch assembly.

(2) Measure the resistance of the switch when the switch is operated.

Standard resistance:





(3) Reinstall the power window regulator master switch assembly.

(b) Except 3 door:





Inspect the driver switch.

(1) Remove the power window regulator master switch assembly.

(2) Measure the resistance of the switch when the switch is operated.

Standard resistance:





(3) Reinstall the power window regulator master switch assembly.

NG -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (MASTER SWITCH - MOTOR (DRIVER SIDE))

(a) Disconnect the G1 power window regulator master switch assembly connector.





(b) Disconnect the G4 power window regulator motor assembly connector.

(c) Measure the resistance of the wire harness side connectors.

Standard resistance:

3 Door





Except 3 door





(d) Reconnect the G1 power window regulator master switch assembly connector.

(e) Reconnect the G4 power window regulator motor assembly connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (DRIVER SIDE)

(a) Remove the power window regulator motor assembly.





(b) Apply battery voltage to connector terminals 1 and 2.

NOTICE:
Do not apply battery voltage to any terminals except terminals 1 and 2.

(c) Check that the motor gear rotates smoothly as follows.

OK:





(d) Reinstall the power window regulator motor assembly

NG -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (DRIVER SIDE)

OK -- GO TO POWER WINDOWS DO NOT OPERATE AT ALL
pro multis · About Operation CHARM