Removal

NAVIGATION: NAVIGATION RECEIVER: REMOVAL

1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Removal

2. REMOVE INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY

(a) Apply protective tape as shown in the illustration.

Text in Illustration

(b) Remove the 4 bolts.

(d) Disconnect each connector and remove the integration control and panel with navigation receiver assembly.

3. REMOVE NO. 1 RADIO BRACKET

(a) Remove the 4 bolts and 2 screws to remove the No. 1 radio bracket.

Text in Illustration

4. REMOVE NO. 2 RADIO BRACKET

(a) Remove the 4 bolts and 2 screws to remove the No. 2 radio bracket.

Text in Illustration

5. REMOVE NAVIGATION RECEIVER ASSEMBLY

(a) Slide the navigation receiver assembly in the direction shown by the arrow to remove the navigation receiver assembly.