Rear Power Window Switch RH Circuit
WINDSHIELD / WINDOW GLASS: POWER WINDOW CONTROL SYSTEM: Rear Power Window Switch RH Circuit
- Rear Power Window Switch RH Circuit
DESCRIPTION
This circuit provides power to operate the multiplex network switch (rear RH side).
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (BATTERY AND BODY GROUND)
(a) Disconnect the I2 connector.
(b) Measure the voltage of the wire harness side connector.
Standard voltage:
(c) Measure the resistance of the wire harness side connector.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE