Installation

WIPER AND WASHER: FRONT WIPER MOTOR: INSTALLATION

1. INSTALL WINDSHIELD WIPER LINK ASSEMBLY

(a) Install the windshield wiper motor assembly with the 3 bolts.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Install the rod to the wiper link assembly.





2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Install the windshield wiper motor & link assembly with the 4 bolts.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

(b) Connect the connector.

3. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH

(a) Operate the wiper, and stop the windshield wiper motor assembly at the automatic stop position.

(b) Clean the wiper arm serrations.





(c) Clean the wiper pivot serrations with a wire brush (before reinstalling).

(d) Install the FR wiper arm & blade assembly RH with the nut at the position as shown in the illustration.





Torque : 20 Nm (209 kgf-cm, 15 ft-lbf)

HINT
Hold the arm hinge by hand to fasten the nut.

4. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH

(a) Clean the wiper arm serrations.





(b) Clean the wiper pivot serrations with a wire brush (when reinstalling).

(c) Install the FR wiper arm & blade assembly LH with the nut at the position shown in the illustration.





Torque : 20 Nm (209 kgf-cm, 15 ft-lbf)

HINT
Hold the arm hinge by hand to fasten the nut.