Installation

AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION

1. PRECAUTION (for Radio and Display Type with Intuitive Parking Assist System)

NOTICE:
When installing the hard disc drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

4. INSTALL NAVIGATION ECU SUB-ASSEMBLY (for Radio and Display Type with Intuitive Parking Assist System)

5. INSTALL HARD DISK DRIVE (for Radio and Display Type with Intuitive Parking Assist System) Installation

6. INSTALL EXTENSION MODULE (for Radio and Display Type)

w/ Navigation System: Installation

7. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

8. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)

(a) Install the No. 1 radio bracket with the 5 screws.

9. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)

(a) Install the No. 2 radio bracket with the 5 screws.

10. INSTALL NO. 1 RADIO BRACKET (for Radio and Display Type)

(a) w/o Navigation System:

(1) Install the No. 1 radio bracket with the 5 screws.

(b) w/ Navigation System:

(1) Install the No. 1 radio bracket with the 7 screws.

11. INSTALL NO. 2 RADIO BRACKET (for Radio and Display Type)

(a) w/o Navigation System:

(1) Install the No. 2 radio bracket with the 5 screws.

(b) w/ Navigation System:

(1) Install the No. 2 radio bracket with the 7 screws.

12. INSTALL NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type with Intuitive Parking Assist System)

(a) Install the No. 1 radio receiver bracket with the 5 screws.

13. INSTALL NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type with Intuitive Parking Assist System)

(a) Install the No. 2 radio receiver bracket with the 5 screws.

14. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type)

(a) Connect each connector.

(b) Engage the 8 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.

(c) Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.

15. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)

(a) Connect each connector.

(b) Engage the 8 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.

(c) Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.

16. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

19. INSTALL BOX BOTTOM MAT Installation

20. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation

21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Radio and Display Type with Intuitive Parking Assist System)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

22. INSPECT HARD DISK DRIVE (for Radio and Display Type with Intuitive Parking Assist System)

Operation Check

23. REPLACED OPERATION (w/ Parking Assist Monitor System)

Calibration