Removal

EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Removal

2. REMOVE FRONT BUMPER ASSEMBLY

(a) Put protective tape around the front bumper assembly.





Text in Illustration





HINT
Use the same procedure for the RH side and LH side.

(b) Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.





Text in Illustration





HINT
Use the same procedure for the RH side and LH side.

(c) Remove the clip.

HINT
Use the same procedure for the RH side and LH side.

(d) Remove the 6 screws.





(e) Disengage the 3 claws.





HINT
Use the same procedure for the RH side and LH side.

(f) Pull back the side of the front bumper assembly as shown in the illustration and disconnect each connector.





Text in Illustration





NOTICE:
Do not apply excessive force when separating the front bumper assembly.

HINT
Use the same procedure for the RH side and LH side.

(g) Using a clip remover, remove the 3 clips.





(h) Remove the front bumper assembly.