Installation

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Pass the hood lock control cable assembly into the engine compartment.

(b) Pass the cable through the upper radiator support.

(c) Engage the hood cable grommet.

(d) Engage the 5 clamps and install the hood lock control cable assembly.

2. INSTALL HOOD LOCK ASSEMBLY

(a) Apply MP grease to the sliding areas of the lock.





(b) Connect the hood lock control cable assembly.

(c) Install the hood lock assembly with the 3 bolts.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(d) w/ Engine Hood Courtesy Switch:

(1) Connect the connector.

3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Connect the hood lock control cable assembly and install the hood lock control lever sub-assembly.

4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Installation

5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

6. INSTALL FRONT DOOR SCUFF PLATE LH Installation

7. INSTALL FRONT FENDER LINER LH

HINT
Use the same procedure for the RH side and LH side Installation.

8. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

HINT
Use the same procedure for the RH side and LH side Installation.

9. INSTALL FRONT WHEEL LH Installation

10. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

Installation

11. ADJUST HOOD SUB-ASSEMBLY

Adjustments