Disassembly

SEAT: FRONT SEAT ASSEMBLY (for SIA Made Manual Seat): DISASSEMBLY

1. REMOVE SEAT ADJUSTER COVER CAP

(a) Remove the 2 seat adjuster cover caps.





2. REMOVE RECLINING ADJUSTER RELEASE HANDLE

(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.





Text in Illustration





3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)

(a) Remove the screw and vertical adjusting handle.





4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

(a) Disconnect the rubber band of the separate type front seatback cover.





5. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)

(a) Remove the screw.





(b) Disengage the 5 claws, 6 guides and clip to remove the front seat cushion shield.

6. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

(a) Remove the screw.





(b) Disengage the 5 claws, 7 guides and clip to remove the front seat cushion shield.

7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)

(a) Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.





8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)

(a) Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.





9. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) Removal

10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) Removal

11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

(a) Disengage the fastener and separate the front seat airbag assembly wire harness.





(b) Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.





(c) Disengage the hook.





(d) Disengage each hook and remove the separate type front seat cushion cover with pad.





12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Remove the 2 hog rings.





(b) Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.





13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

(a) Remove the 5 hog rings.





(b) Remove the 3 hog rings.





(c) Remove the 2 hog rings.





(d) Turn back the separate type front seatback cover.

(e) Remove the 2 nuts and the 3 brackets.





(f) Disengage the 4 claws and remove the 2 front seat headrest supports.





(g) Remove the separate type front seatback cover with pad.

14. REMOVE FRONT SEAT AIRBAG ASSEMBLY Removal

15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

(a) Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.





16. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

(a) Remove the screw.





(b) Disengage the hook as shown in the illustration.

(c) Disengage the clip and remove the front seat lower cushion shield LH.

17. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)

(a) Remove the screw.





(b) Disengage the hook as shown in the illustration.

(c) Disengage the clip and remove the front seat lower cushion shield RH.

18. REMOVE RECLINING ADJUSTER INSIDE COVER LH

(a) Disengage the guide and remove the reclining adjuster inside cover LH.





19. REMOVE RECLINING ADJUSTER INSIDE COVER RH

(a) Disengage the guide and remove the reclining adjuster inside cover RH.





20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)

(a) Remove the screw.





(b) Disengage the 3 claws to remove the front seat cushion edge protector LH.

21. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)

(a) Remove the screw.





(b) Disengage the 3 claws to remove the front seat cushion edge protector RH.

22. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)

(a) Remove the screw.





(b) Disengage the 3 claws to remove the front seat cushion edge protector LH.

23. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)

(a) Remove the screw.





(b) Disengage the 3 claws to remove the front seat cushion edge protector RH.

24. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side) Removal

25. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)

(a) Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire RH.

26. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

(a) Remove the 4 bolts.





(b) Disengage the 4 guides to remove the separate type front seatback spring assembly.

27. REMOVE SEAT TRACK ADJUSTING HANDLE

(a) Disengage the 2 springs to remove the seat track adjusting handle.