Removal

BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL

1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

Removal

2. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System) Removal

3. REMOVE STOP LIGHT SWITCH ASSEMBLY Removal

4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

5. REMOVE PUSH ROD PIN

(a) Remove the clip and push rod pin.

(b) Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

6. REMOVE BRAKE PEDAL RETURN SPRING

(a) Remove the brake pedal return spring from the brake pedal support assembly.

7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Disconnect the brake pedal load sensing switch connector and disengage the clamp.

(b) Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.