Removal

NETWORKING: NETWORK GATEWAY ECU: REMOVAL

NOTICE:
* When disassembling the network gateway ECU, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
* After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization.

2. REMOVE ECU INTEGRATION BOX RH

Removal.

3. REMOVE NETWORK GATEWAY ECU

(a) Disengage the 2 claws and remove the network gateway ECU.