Installation

SEAT BELT: CHILD RESTRAINT SEAT ANCHOR BRACKET: INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

(a) Install the child restraint seat anchor bracket sub-assembly LH with the 2 nuts.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

2. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

(a) Install the child restraint seat anchor bracket sub-assembly RH with the 2 nuts.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

3. INSTALL REAR SIDE SEATBACK ASSEMBLY LH Installation

4. INSTALL REAR SIDE SEATBACK ASSEMBLY RH Installation

5. INSTALL REAR SEATBACK ASSEMBLY LH Installation

6. INSTALL REAR SEATBACK ASSEMBLY RH Installation

7. INSTALL INNER LUGGAGE COMPARTMENT TRIM PAD Installation

8. INSTALL REAR SEAT CUSHION LOCK HOOK Installation

9. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSPECT SRS WARNING LIGHT

for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor