Removal

WIPER / WASHER: WASHER MOTOR: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

(a) Remove the 3 screws and front wheel opening extension pad RH.





3. REMOVE FRONT FENDER LINER RH

(a) Remove the clip.





(b) Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.





Text in Illustration





(c) Remove the 5 screws.





(d) Remove the 4 clips, 2 grommets and front fender liner RH.

HINT
The grommets need to be replaced with new ones because they will break when they are removed.

Text in Illustration





4. DRAIN WASHER FLUID

(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.





HINT
Use a container to collect the washer fluid.

5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Disconnect the connector.





(b) Remove the windshield washer motor and pump assembly as shown in the illustration.