Removal
HEATING / AIR CONDITIONING: COMPRESSOR (for 2GR-FE): REMOVAL
1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM Service and Repair
2. REMOVE RADIATOR ASSEMBLY
Removal
3. REMOVE FRONT FENDER APRON SEAL RH
4. REMOVE V-RIBBED BELT Removal
5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
(a) Disconnect the 3 connectors.
(b) Disengage the 2 clamps.
(c) Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnetic clutch.
(d) Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the suction hose sub-assembly from the compressor and magnetic clutch.
(b) Remove the O-ring from the suction hose sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
7. REMOVE COMPRESSOR AND MAGNETIC CLUTCH
(a) Remove the 4 bolts and compressor and magnetic clutch and bracket.