Installation

NAVIGATION / MULTI INFO DISPLAY: HARD DISK DRIVE: INSTALLATION

1. PRECAUTION

NOTICE:
When installing the hard disc drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL HARD DISK DRIVE

(a) Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.





(b) Engage the 2 guides to temporarily install the cover.

(c) Install the cover with the 2 screws.

3. INSTALL NO. 2 RADIO BRACKET (w/ Daytime Running Light) Installation

4. INSTALL NO. 2 RADIO BRACKET (w/o Daytime Running Light) Installation

5. INSTALL NAVIGATION RECEIVER WITH BRACKET (w/ Daytime Running Light) Installation

6. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Daytime Running Light) Installation

7. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

8. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

9. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

10. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

11. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL REAR NO. 3 FLOOR BOARD Installation

13. INSTALL REAR DECK FLOOR BOX Installation

14. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

15. INSPECT HARD DISK DRIVE

for Navigation Receiver Type: Operation Check

for Radio and Display Type: Operation Check