Plug-In Charge Control System

HYBRID / BATTERY CONTROL: PLUG-IN CHARGE CONTROL SYSTEM: UTILITY

1. CHARGE CANCEL HISTORY

NOTICE:
* This function shows the reason/cause of plug-in charging failures.
* If plug-in charging is cancelled, delayed or interrupted due to a cause other than a vehicle malfunction (no DTC output), the cause is memorized in the "Charge Cancel History".
* According to the items in the following table, the freeze frame data and accumulated total of occurrences are recorded in the Charge Cancel History when charging fails.

HINT
* When an item is memorized in the Charge Cancel History, the next time the power switch is turned on (IG) a message is displayed on the multi-information display as "CHARGE RESULT:".
* Reading the freeze frame data that is recorded at the time when a charging failure occurs helps determine the cause of plug-in charging failure (canceled, delayed, etc.).

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Enter the following menus: Powertrain / Plug-in Control / Utility / Charge Cancel History.

(d) Referring to the following table, confirm the "Charge Cancel History".

User Operation (Connector Related)





Charging Cable/Charging Equipment





Other





Delayed





2. Charge Cancel History Freeze Frame Data

HINT
* Up to three of the most recent data for each "Charge Cancel History" group (user operation (connector related), charging cable/charging equipment, others, and delay) is recorded as freeze frame data.
* The latest "Charge Cancel History" freeze frame data can record data at the time a charging failure is detected as well as up to 3 seconds from that point. Freeze frame data is useful when performing troubleshooting or interviewing a customer because the plug-in charging failure condition (canceled, delayed, etc.) and user operation condition can be accurately confirmed by reading it. It can also be useful when performing a reproduction test.
* With the latest "Charge Cancel History" freeze frame data, the charging failure detection point changes between point 3 and 4 depending on the conditions.






(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Enter the following menus: Powertrain / Plug-in Control / Utility / Charge Cancel History.

(d) Select "Charge Cancel History" to display the freeze frame data for the time a plug-in charge failure (canceled, delayed, etc.) occurred.

(e) Check the freeze frame Data recorded with the Charge Cancel History.

Charge Cancel History Freeze Frame Data