Installation

EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) w/ Headlight Cleaner System:

(1) Connect the headlight cleaner hose.

(b) Connect each connector.

(c) Install the front bumper assembly as shown in the illustration.





(d) Engage the 3 claws.





HINT
Use the same procedure for the RH side and LH side.

(e) Install the 3 clips and 4 bolts.

Bolt - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(f) Install the 6 screws [A].





Text in Illustration





(g) Install the 2 screws [B].

Screw B - Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

(h) Install the pin hold clip.





Text in Illustration





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR SUPPORT OPENING COVER

(a) Engage the 3 guides.

(b) Install the radiator support opening cover with the 3 clips.

3. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

4. ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

Adjustments