Removal

EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY

(a) Put protective tape around the rear bumper assembly.





Text in Illustration





(b) Remove the 2 bolts.





(c) Using a clip remover, remove the 4 clips.





(d) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(e) Disengage the 2 claws.

HINT
Use the same procedure for the RH side and LH side.

(f) Disengage the 5 claws.





HINT
Use the same procedure for the RH side and LH side.

(g) Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.