Component Tests and General Diagnostics

LIGHTING (INT): PERSONAL LIGHT: INSPECTION

1. INSPECT MAP LIGHT ASSEMBLY

(a) Inspect the interior light operation.

(1) Connect a positive (+) lead from the auxiliary battery to terminal 11 (+B1) and a negative (-) lead to terminal 15 (GND1) or 6 (CTY).





Result:





Text in Illustration





If the result is not as specified, replace the bulb or map light assembly.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the map light assembly.