Removal

2ZR-FXE ENGINE CONTROL: THROTTLE BODY: REMOVAL

1. DRAIN ENGINE COOLANT (for Engine) Coolant (for Engine)

2. REMOVE NO. 2 CYLINDER HEAD COVER Removal

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

(a) Disconnect the mass air flow meter connector.





(b) Release the 2 clamps.





(c) Loosen the hose clamp and remove the air cleaner cap sub-assembly.

4. REMOVE AIR CLEANER INLET ASSEMBLY

(a) Separate the water hose from the hose clamp.





(b) Separate the wire harness clamp from the air cleaner inlet assembly.

(c) Remove the 3 bolts and air cleaner inlet assembly.

5. REMOVE AIR CLEANER CASE

(a) Remove the air cleaner filter element sub-assembly.

(b) Separate the water hose from the 3 hose clamps.





(c) Remove the 3 bolts and air cleaner case.

6. REMOVE AIR CLEANER HOSE ASSEMBLY

(a) Loosen the hose clamp and separate the ventilation hose.





(b) Unlock the hose clamp and remove the air cleaner hose assembly.

7. REMOVE THROTTLE BODY ASSEMBLY

(a) Disconnect the throttle body connector and 2 water by-pass hoses.





(b) Remove the 2 bolts, 2 nuts and throttle body assembly.

(c) Remove the gasket from the intake manifold.