Removal

WIPER / WASHER: WASHER MOTOR (for Front Side): REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY RH

HINT
Use the same procedure as for the LH side .

3. REMOVE FRONT FENDER LINER RH

(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.





Text in Illustration





(b) Remove the 9 clips and 3 screws.





(c) Using a clip remover, remove the 2 grommets and front fender liner RH.

Text in Illustration





HINT
The grommet needs to be replaced with a new one because it will break when it is removed.

4. DRAIN WASHER FLUID

(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.





HINT
Use a container to collect the washer fluid.

5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Disconnect the connector.





(b) Remove the windshield washer motor and pump assembly.