Removal

WIPER / WASHER: FRONT WIPER MOTOR: REMOVAL

1. REMOVE FRONT WIPER ARM HEAD CAP

(a) Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.

Text in Illustration

HINT
Tape the screwdriver tip before use.

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

(a) Remove the nut and front wiper arm and blade assembly LH.

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

(a) Remove the 2 nuts and front wiper arm and blade assembly RH.

4. REMOVE FRONT VENTILATOR ASSEMBLY

(a) Disengage the 2 claws and remove the front ventilator assembly as shown in the illustration.

HINT
Use the same procedure for the RH side and LH side.

5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

(a) Remove the 2 clips.

(b) Disengage the 5 claws and 3 guides.

6. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Operate the wiper and stop the windshield wiper motor at the automatic stop position.

(b) Disconnect the connector.

(c) Disengage the clamp.

(d) Remove the 4 bolts.

(e) Disengage the grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

Text in Illustration

NOTICE:
Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

7. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY

(a) Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.

Text in Illustration

HINT
Tape the screwdriver tip before use.

(b) Remove the nut and front wiper crank sub-assembly.

8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

(a) Remove the 3 bolts and windshield wiper motor assembly.