Installation

1AR-FE INTAKE / EXHAUST: VACUUM SWITCHING VALVE (for ACIS): INSTALLATION

1. INSTALL VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

(a) Install the vacuum switching valve assembly (for ACIS) with the bolt.





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(b) Connect the 2 vacuum hoses, clamp and connector.

2. INSTALL OUTER COWL TOP PANEL Installation

3. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation

4. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation

5. INSTALL FRONT FENDER TO COWL SIDE SEAL LH Installation

6. INSTALL FRONT FENDER TO COWL SIDE SEAL RH Installation

7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

8. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation

9. INSTALL FRONT WIPER ARM HEAD CAP Installation

10. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation