Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Venza FWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Testing and Inspection >> Pinout Values and Diagnostic Parameters >> Wireless Door Lock Control System (w/o Smart Key System)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wireless Door Lock Control System (w/o Smart Key System)





DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System): TERMINALS OF ECU

1. CHECK MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the 2A, 2C and 2F main body ECU (driver side junction block assembly) connectors.





(b) Measure the voltage and resistance according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the 2A, 2C and 2F main body ECU (driver side junction block assembly) connectors.

(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the main body ECU (driver side junction block assembly) may have a malfunction.
pro multis · About Operation CHARM